Loading... Please wait...

Our Newsletter

Tekno RC NT48 Nitro 1/8 4WD Competition Truggy Kit TKR5400

Bookmark and Share

Product Description

This is the Tekno RC NT48 Nitro 1/8 Scale 4WD Competition Truggy Kit.


  • Four wheel CV driveshafts with captured pins on all four wheels
  • Engine can be mounted in forward or rearward position (18mm) offset
  • CNC machined anodized 7075 aluminum shock towers, front 0.24" (6mm) thick, rear 0.20" (5mm) thick
  • Steel disc brakes with semi-metallic pads
  • 5.1oz (150cc) Fuel Tank
  • Clear truggy body with high downforce wing, and an adjustable wing mount
  • Adjustable caster/toe-in and front/rear camber
  • Full ball bearing equipped steering, lightened aluminum posts, adjustable bump steer and Ackerman
  • CNC machined hard anodized aluminum chassis, 0.16" (4mm) thick, optimized narrow layout with adjustable weight distribution and flex characteristics
  • Three fluid filled differentials, with straight cut CNC machined hardened steel ring and pinion gears, offset rear diff provides minimum drive angles and reduced wear
  • Shocks are CNC machined hard anodized aluminum bodies, 16mm bore, with 4mm hardened steel polished shafts, 5.4" (137mm) long rear shocks, 4.8" (122mm) long front shocks, truggy specific springs, CNC machined 8x1.3mm tapered pistons
  • Fully adjustable long travel geometry suspension, truggy specific arms and sway bars, lightened aluminum pivot balls, adjustable anti-squat, rear arms, roll center, and bump steer
  • Four 7075 aluminum clutch shoes
  • Throttle Linkage is CNC machined assembly riding on ball bearings

One Tekno RC NT48 Nitro 1/8 Scale 4WD Competition Truggy Kit with a Clear Truggy Body, Decals, Shocks, Shock Oil, Diff Oil, and Instructions

Radio: 2-3 channel with high-torque steering servo
Receiver Battery: 6V, hump comfiguration
Starter box and glow igniter
Engine: .21-.28 cu in truggy type
Tires and Wheels: 1/8 scale truggy type with inserts
Fuel and fuel bottle
Paint, building and track equipment


Length: 23.4" (595mm)

Wheelbase: 14.8-15.1" (375-385mm) adjustable
Width: 16.4-16.5" (416-420mm)
Dry Weight: 9.1lbs (4040g) may vary with equipment used
Diff Ratio: F/R 9/40t, center 48T

Length: 17" (432mm)

Width: 7.25" (184mm)
Height: 4.1" (105mm)

Find Similar Products by Category

Currency Converter

Add to Wish List

Click the button below to add the Tekno RC NT48 Nitro 1/8 4WD Competition Truggy Kit TKR5400 to your wish list.

You Recently Viewed...