Loading... Please wait...

Our Newsletter

Tekno RC ET48 Truggy Competition 1/8 4WD Kit TKR5600

Bookmark and Share

Product Description

This is the Tekno RC ET48 1/8 Scale 4WD Electric Competition Truggy Kit.


  • Four wheel CV driveshafts with captured pins on all four wheels
  • Two-piece CNC machined motor mount with dual clamping gear mesh adjustment, lightweight direct-to-diff mount design, mount accommodates truggy or long can motors up to 78mm long, mount uses standard MOD 1 pinion, Tekno RC Traktion Drive or Elektri-Clutch
  • CNC machined anodized 7075 aluminum shock towers, front 0.24" (6mm) thick, rear 0.20" (5mm) thick
  • Clear truggy type body with high downforce wing, and adjustable wing mount
  • Full ball bearing equipped steering, lightened aluminum posts, adjustable bump steer and Ackerman
  • CNC machined hard anodized aluminum chassis, 0.16" (4mm) thick, with an optimized narrow layout
  • Three fluid filled differentials, with straight cut CNC machined hardened steel ring and pinion gears
  • CNC machined hard anodized aluminum bodied shocks, 16mm bore, 4mm hardened steel polished shafts, 5.4" (137mm) long rear shocks, 4.8" (122mm) long front shocks, truggy specific springs, CNC machined 8x1.3mm tapered pistons
  • Fully adjustable long travel geometry suspension, truggy specific arms and sway bars, lightened aluminum pivot balls, adjustable anti-squat, rear arms, roll center, and bump steer
  • Adjustable caster/toe-in and front/rear camber

One Tekno RC ET48 1/8 Scale 4WD Electric Competition Truggy Kit, Decals, Shocks, Shock Oil, Diff Oil, and Instructions


Radio: 2-3 channel with high-torque steering servo, and optional brake servo
Motor: Brushless recommended
ESC: Compatible with selected motor
Battery: 4-6S LiPo
Battery Charger: For selected battery
MOD 1 Pinion or Traktion Drive/Elektri-Clutch system
Tires and Wheels: 1/8 scale truggy type with inserts
Paint, building and track equipment


23.4" (595mm)
Wheelbase: 14.8-15.1"(375-385mm) adjustable
Width: 16.4-16.5" (416-420mm) optional hubs required
Dry Weight: 9.0lbs (4000g) may vary with equipment used
Diff Ratio: F/R 9/40t, center 44T
Battery Tray Dimensions: 1.9x5.8" (50x148mm) 2x2s or 1x4s config.

17.5" (444mm)
Width: 4.8" (123mm)
Height: 5" (127mm)

Find Similar Products by Category

Currency Converter

Add to Wish List

Click the button below to add the Tekno RC ET48 Truggy Competition 1/8 4WD Kit TKR5600 to your wish list.

You Recently Viewed...